Search results for "Universal testing machine"
showing 10 items of 69 documents
Zeolite-silver-zinc nanoparticles : biocompatibility and their effect on the compressive strength of mineral trioxide aggregate
2016
Background This study was carried out to evaluate the biocompatibility of zeolite-silver-zinc (Ze-Ag-Zn) nanoparticles and their effect on the compressive strength of Mineral Trioxide Aggregate (MTA). Material and Methods Biocompatibility was evaluated by an MTT assay on the pulmonary adenocarcinoma cells with 0.05, 0.1, 0.25, 0.5, 1 and 5 mg/mL concentrations of Ze-Ag-Zn. For compressive strength test, four groups containing 15 stainless-steel cylinders with an internal diameter of 4 and a height of 6 mm were prepared and MTA (groups 1 and 2) or MTA + 2% Ze-Ag-Zn (groups 3 and 4) were placed in the cylinders. The compressive strength was evaluated using a universal testing machine 4 days a…
Effect of various dentin disinfection protocols on the bond strength of resin modified glass ionomer restorative material.
2017
Background Disinfection of dentin surface prior to any restorative therapy is important for the longevity of the treatment rendered. However, these dentin disinfection methods should itself not interfere with the adhesion of the restorative material. Therefore the aim of this study was to determine the effect of various dentin disinfection protocols on the shear bond strength (SBS) of resin modified glass ionomer cement (RMGIC). Material and methods The occlusal surface of 40 extracted premolars were trimmed to obtain a flat dentinal surface and was randomly divided into four groups. CTRL was the control group; NaOCl was 1% sodium hypochlorite disinfection group; CHX was 2% chlorhexidine di…
Vertical root fracture resistance of simulated immature permanent teeth filled with MTA using different vehicles
2017
Background The aim of the study is to evaluate the resistance vertical root fracture (VRF) of mineral trioxide aggregate (MTA) filled-immature permanent roots by using three different vehicles. Material and Methods Forty-extracted human single-rooted mandibular premolars were selected and the root length was standardized to the length of 9 mm. For simulation of immature tooth apices, peeso reamers were introduced into the root canals and the prepared roots were assigned into three experimental groups according the used vehicle (distilled water-DW, prophylene glycol-PG, chlorhexidine-CHX) and control group (n=10). To simulate a periodontal membrane, the apical 7 mm of all roots was covered w…
Effect of Smear Clear and Some Other Commonly Used Irrigants on dislodgement resistance of Mineral Trioxide Aggregate to Root Dentin
2016
Background This study aimed to assess the push-out bond strength of mineral trioxide aggregate (MTA) to root canal dentin after irrigation with Smear Clear in comparison with 2.5% sodium hypochlorite (NaOCl), 2% chlorhexidine (CHX) and saline as commonly used root canal irrigants. Material and Methods The coronal and mid-root areas of maxillary anterior teeth were horizontally sectioned into one-millimeter thick slices. The root canal lumen of dentinal slices was dilated using a diamond bur with 1.3 mm diameter. After the application of MTA, the samples were incubated in 100% humidity for 10 minutes and were then randomly divided into four groups (n=20) and immersed in Smear Clear, 2.5% NaO…
Comparative evaluation of shear bond strength of universal dental adhesives : an in vitro study
2017
Background Patient demand for tooth colored restorations and desire for minimally invasive restorations have made composites an indispensable part of the restorative process. An important factor affecting the intra-oral performance of composite restorations is bonding. Material and methods Ninty six freshly extracted molar teeth were collected and occlusal 3mm is removed using a diamond disc to expose dentine. Following with samples were divided in to two main groups (self-etch & total etch). Each main group is again sub divided in to three groups each according to bonding agent used (Tetric N- Bond Universal, Single Bond Universal, Tetric N Bond Total etch in total etch group and Clear Fil…
The effect of pre-cure bracket movement on shear bond strength during placement of orthodontic brackets, an in vitro study
2017
Background The purpose of this study was to determine the influence of linear and rotational pre-cure bracket displacement during the bonding procedure on shear bond strength (SBS) of orthodontic brackets. Material and Methods Stainless steel orthodontic premolar brackets were bonded to the buccal surfaces of 50 human pre-molars with a conventional two-step bonding protocol. Extracted human pre-molars were divided into 5 groups (n=10/group). In the Control Group, the brackets were bonded with no pre-cure bracket displacement or rotation. The Rotation Group was bonded with 45 degrees of pre-cure rotation. The Displacement Group was bonded with 2mm pre-cure linear displacement. The Rotation-D…
Immediate and long-term microshear bond strength of resin-based cements to core build-up materials
2021
Background To evaluate the microshear bond strength (μ-SBS) between resin-based cements and core build-up materials after water storage. Material and methods Cylinders (1x1 mm) of conventional dual-cure resin cement (RelyX ARC, 3M ESPE), universal dual-cure resin cement (RelyX Ultimate, 3M ESPE) or self-adhesive resin cement (RelyX U200, 3M ESPE) were adhered to disks (6x2 mm) made with commercial core build-up materials (Bis-Core, Bisco or LuxaCore Z, DMG) or conventional nanocomposite resin (Filtek Z350 XT, 3M ESPE). The specimens (n=10) were submitted to μ-SBS test using a universal testing machine and fracture pattern analysis at 48 hours or after 9 months of water storage. The data wer…
Bond strength according to the moment of fiber post cutting fixed with self-adhesive cement to the root dentin
2021
Background The fiber posts require a cut in the coronal portion to adjust it to the available clinical space. The cutting of posts cemented may generate tension via bur vibrations of drill on the bonding interface, with the possibility of decreasing the bond strength. Thus, this study aimed to evaluate if the moment of cutting the fiber posts has an effect on its bond strength when fixed with self-adhesive resin cement. Material and methods Thirty-six bovine teeth were randomly divided into three groups after endodontic treatment and post space preparation (n = 12): IAC- the fiber posts were cutting immediately after cementation; ACR - the fiber posts were cutting after coronal reconstructi…
Bond strength evaluation of the veneering-core ceramics bonds.
2009
The purpose of this study was to determine whether the bond of veneering porcelain to a ceramic core in bilayered ceramics was similar to that of the metal ceramic control of well known behaviour. Six groups of nine specimens each were fabricated, whose dimensions were 15 mm long and 8 mm in diameter at the core, and 2 mm long and 8 mm in diameter for the veneer. The groups were GR. 1 (control group): CrNi alloy/d.SIGN (Ivoclar), GR. 2: IPS e.maxPress/IPS e.maxCeram (Ivoclar), GR. 3: IPS e.maxZirCad/ IPS e.maxZirPress (Ivoclar), GR. 4: IPS e.maxZirCad/IPS e.maxCeram (Ivoclar), GR. 5: Lava Frame (3M ESPE)/ Lava Ceram (3M ESPE) and GR. 6: Lava Frame (3M ESPE)/IPS e.maxCeram (Ivoclar). A shear…
Effects of femtosecond laser and other surface treatments on the bond strength of metallic and ceramic orthodontic brackets to zirconia.
2017
Femtosecond laser has been proposed as a method for conditioning zirconia surfaces to boost bond strength. However, metallic or ceramic bracket bonding to femtosecond lasertreated zirconia surfaces has not been tested. This study compared the effects of four conditioning techniques, including femtosecond laser irradiation, on shear bond strength (SBS) of metallic and ceramic brackets to zirconia.Three hundred zirconia plates were divided into five groups: 1) control (C); 2) sandblasting (APA); 3) silica coating and silane (SC); 4) femtosecond laser (FS); 5) sandblasting followed by femtosecond laser (APA+SC). A thermal imaging camera measured temperature changes in the zirconia during irrad…